QT4-18A  BLOCK SHAPING MACHINE

QT4-18 Block Forming Machine is completely controlled by PLC system. By operating its computer interfaces, the random signal analysis, fault diagnosis and parameter setting-up of all kinds of materials can be achieved, easily.

     The material stock hopper and the material feeding hopper are separated, to each other, for the purpose of quantitative feed of materials, which can effectively control the advance liquidation of some concrete and reduce the feeding time.

     Its unique material-feeding device can quickly and evenly discharge the materials into the molding box so that the weight error in finished products can be reduced to the minimum.

     For its frame structure, super-strong shaped steel bars are used; for its electronic and hydraulic systems, most the important elements are imported. So, all of these have ensured the stability and reliability of the machine in long term of operation.

     This machine has good applicability. It not only can be used for producing concrete blocks of high strength, but also for Pulverized Coal Ash bricks, Cinder Bricks, Mine Slag Blocks, and so on. Only by changing different moulds and dies, the hollow blocks and solid blocks of different specifications can be manufactured.

Main Technical Specifications:

Product Quantity：400×200×200  4 pieces/mould  6000 pcs/8h

                  400×150×200  6 pieces/mould  8000 pcs/8h

400×120×200  8 pieces/mould  11000pcs/8h

Power：29.4kw

Overall Size：3700×1620×2550mm

Cycle：18S

Carriage Size：900×550×35mm

Vibration Frequency：max.4000r/m

Electrical source： 380V/50Hz

Total Mass：6000kg